Flare 3.0
Couldn't load pickup availability
Details
Significantly improve your cell phone signal for all US carriers inside any home, cabin, small building or office up to 3,500 square feet. Flare 3.0 features 2XP technology which doubles uplink transmission power to connect users with reliable 5G/4G LTE connectivity in the weakest signal environments. Flare 3.0 home phone signal booster is trusted by thousands of customers across the US for its huge boosting power in a compact, attractive design. It comes kitted with a high-power outdoor Yagi directional antenna and a booster with an omni-directional antenna all in one housing that creates a 'null zone' allowing it to provide more coverage than other traditional booster designs. Together with the increased uplink power and upgraded antenna Flare 3.0 cell phone service booster provides 8X more connecting power for homes and offices in the most challenging signal locations.
- Designed to improve reception inside homes, cabins, small buildings or office spaces up to 3,500 square feet
- Improves 5G/4G LTE voice, text and data signals for all North American carriers
- Reduces missed and dropped calls and increases data speeds
- 2XP technology delivers 2x uplink power for best performance in remote areas
- Supports multiple simultaneous users
- 5G Compatible– Flare 3.0 boosts all 5G & 4G LTE devices, including hotspots
- Designed, assembled and tested in the USA
- Industry best 3-year warranty and lifetime US-based tech support
Product Specifications
|
Part Number: |
SC-Flare3US |
|
Uplink Frequency Range (MHz): |
698-716 / 776-787 / 824-849 / 1850-1915 / 1710-1755 (G Block Included) |
|
Downlink Frequency Range (MHz): |
728-746 / 746-757 / 869-894 / 1930-1995 / 2110-2155 (G Block Included) |
|
Donor/Server Port Impedance: |
75 Ohm / 50 Ohm |
|
Maximum Gain: |
72 dB |
|
Noise Figure: |
7 dB |
|
VSWR: |
≤2.0 |
|
Supported Standards: |
CDMA, WCDMA, GSM, EDGE, HSPA+, EVDO 4G LTE and all cellular standards |
|
AC Input: |
Input: AC 110 – 240 V, 60 Hz ; Output: DC 5V / 3A |
|
Maximum Output Power: |
1 Watt EIRP |
|
Cable: |
RG-6 (50 ft) |
|
RF Connector: |
F-Female |
|
Power Consumption: |
<12W |
|
Weight: |
1.81 lb |
|
Dimensions: |
5.125" × 7.25" × 5.625" |
Support Documents
 |
|
|
This is a CONSUMER device.
BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your provider's consent. Most wireless providers consent to the use of signal boosters. Some providers may not consent to the use of this device on their network. If you are unsure, contact your provider.
- You MUST operate this device with approved antennas and cables as specified by the manufacturer. Antennas MUST be installed at least 20 cm (8 inches) from any person.
- You MUST cease operating this device immediately if requested by the FCC or a licensed wireless service provider.
- WARNING. E911 location information may not be provided or may be inaccurate for calls served by using this device.
- Please note, the four largest carriers - AT&T, T-Mobile, Verizon and Sprint - and more than 90 regional carriers have given blanket consent for use of all boosters certified to the new FCC standards.
The Custom Tab allows you to display personalized content on your product page with full flexibility.
You can easily manage what appears inside this tab by choosing one of the following options:
- Manual Input: Enter content directly in the theme settings.
- Metafield Source: Connect the tab to a metafield to display dynamic, product-specific information.
- Page Content: Pull existing content from a Shopify page to reuse or centralize updates.
This feature is ideal for showing size guides, care instructions, brand stories, shipping details, or any custom information you want your customers to see — all without touching any code.